![]() Changes since Ver.1.0 - LUT supports 10-bit, 12-bit (EOS C500 / EOS C500 PL only) and 16-bit (EOS C500 / EOS. ![]() LUT Category Viewing LUT LUT Overview A 1D LUT that converts from Canon Log / Canon Log 2 / Canon Log 3 gamma File Format.cube format Applicable Models Different 1D LUTs are used because different products have different gamma settings. ![]() Besides the 1D LUT, 3D LUTs that allow color range and gamma conversion are also available. Gamma Transfer 1D LUT (1D Look-Up Table, Version 2.2. I don't know if this is how it has always worked. LUT for conversion from Canon Log gamma to Rec.709 gamma. If you need a copy of the camera manual it is available HERE. ![]() If you would like to reference the camera manual for information on selecting the different profiles and how to customize them that is on pages 115-122. This is in Media Composer 2020.12.6 and a timeline set to Rec.709. If you need to record in Canon Log 2 or Canon Log 3 we would recommend setting the camera to record in that profile from the start. With that in place I got the expected output on the waveform monitor. Then I applied the LUT to the clip in Media Compiser - and the waveform was off! After poking around a bit it turned out that MC needs an adapter to scale "full to legal" BEFORE the LUT. Loaded the LUT into the FS7 and used it as a monitor LUT on the SDI output. Then I made an adjustment in Reaolve and exported it as a LUT. Checked the SDI output, and the levels from both programs were the same as from the camera (no color adapters applied in MC). I recorded a few seconds and brought the file into Media Composer and Resolve. Using the same motive, light and apature I checked the level of the SDI output from the camera on a waveform monitor.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |